Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sound in front end

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

sound in front end

Post by stokedapollo »

hey guys quick question
i have a wirr wirr sound in front end i know its in front as i turned off motor and rolled down hill
it goes away if i turn left and righ i think its maybe the bearings or the hubs??
what do you guys think and recomend
its only a dull sound at present not rough or growly or metal sounding
cheers guys
Top
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

any body? lol
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Seen your cat lately? :D
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

RoadNazi wrote:Seen your cat lately? :D
Yep, here it is......
http://www.outerlimits4x4.com/ftopic144766.php
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

well i found out what it was
worst thing was it wasnt the cat
after doing the bearing in the left i test drove it and nope still there
so went to do the right side and wow
it was loose
but the tab/washer ring thing hadnt been bent over at all so there was no locking of the nuts
figured out how it came loose tho
was reversing up hill with trailer in 4wd so i guess it un tightened
put it all back together and
bam no noise
woo hooo
thanks for the concern bout the cats lol
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Good to see someone found and rectified a problem. Think I'll check mine this weekend............
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest