Can any body help me? i have lifted a manual before, and made the trans tunnel hole larger to allow for new angle of gearstick being 2 inches lower. what do you do for an auto? as the shifter will be lower, the notches in the position of gears will no longer line up with the selecter. is there enough freeplay for the shifter? This is the first auto i have owned so am unsure, and want to find out before i get halfway through a job and get stuck.
Cheers Daniel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.2 Auto body lift
Re: 4.2 Auto body lift
mine was no problem with the auto. just make the hole for the 4wd shifter.. that it.dklyne454 wrote:Can any body help me? i have lifted a manual before, and made the trans tunnel hole larger to allow for new angle of gearstick being 2 inches lower. what do you do for an auto? as the shifter will be lower, the notches in the position of gears will no longer line up with the selecter. is there enough freeplay for the shifter? This is the first auto i have owned so am unsure, and want to find out before i get halfway through a job and get stuck.
Cheers Daniel
Who is online
Users browsing this forum: No registered users and 1 guest