Page 1 of 1
4.2 Auto body lift
Posted: Fri Jun 27, 2008 9:02 pm
by dklyne454
Can any body help me? i have lifted a manual before, and made the trans tunnel hole larger to allow for new angle of gearstick being 2 inches lower. what do you do for an auto? as the shifter will be lower, the notches in the position of gears will no longer line up with the selecter. is there enough freeplay for the shifter? This is the first auto i have owned so am unsure, and want to find out before i get halfway through a job and get stuck.
Cheers Daniel
Re: 4.2 Auto body lift
Posted: Sat Jun 28, 2008 12:17 am
by bogged
dklyne454 wrote:Can any body help me? i have lifted a manual before, and made the trans tunnel hole larger to allow for new angle of gearstick being 2 inches lower. what do you do for an auto? as the shifter will be lower, the notches in the position of gears will no longer line up with the selecter. is there enough freeplay for the shifter? This is the first auto i have owned so am unsure, and want to find out before i get halfway through a job and get stuck.
Cheers Daniel
mine was no problem with the auto. just make the hole for the 4wd shifter.. that it.
Posted: Sat Jun 28, 2008 7:35 am
by dklyne454
Thanks bogged. appreciate the help.
Daniel
Posted: Sat Jun 28, 2008 12:40 pm
by cooki_monsta
mate dont make a hole, move your boot, its easier and cleaner, unbolt the gear boot, then screw it back in when your finished