Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Comp Truck Trailers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Comp Truck Trailers

Post by The_Wazza »

I'm preparing to make comp truck trailers to hire. Just wondering how much interest there is out there in doing this? Any suggestions are welcome.
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I'll hire one off you! But you'll have to arrange to get it too me!!!!
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

I'm not interested as we've been building our own.

Question - How will they be different from a normal car trailer from the local servo?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

If you were closer etc i would be interested.
width is the main thing champ.
i find most ones you can rent are not wide enough.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

WICKED wrote:I'm not interested as we've been building our own.

Question - How will they be different from a normal car trailer from the local servo?
wider to start with
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

normal car trailers are only rated to 1300kg also, I would be interested if in Bris. It is hard to get a trailer that will fit a patrol with 12.5's inside the rails.
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

WICKED wrote:I'm not interested as we've been building our own.

Question - How will they be different from a normal car trailer from the local servo?
they might have twin motors :lol:
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

I think its a pretty limited market. There's probably only a handful of people in each city that need them every few weeks to months.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Most people that have the dollars for a comp rig and a rig able to tow it have the money for a trailer of their own.
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Guts wrote:Most people that have the dollars for a comp rig and a rig able to tow it have the money for a trailer of their own.
Agreed. I built my own, and loan it out to mates with comp rigs for Cartons :D
[url]www.twinstickoffroad.com[/url]
Top
Posts: 382
Joined: Thu Jun 02, 2005 9:43 pm
Location: laying on your couch

Post by gqpete »

Guts wrote:Most people that have the dollars for a comp rig and a rig able to tow it have the money for a trailer of their own.
i got sick of hiring , pita. bought my own. best thing i did.
lick my vinegary balls.
veeeeryniiiice
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Post by The_Wazza »

nzdarin wrote:I'll hire one off you! But you'll have to arrange to get it too me!!!!
lol... might have to ship it over to you.. :)
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Post by The_Wazza »

1MadEngineer wrote:
WICKED wrote:I'm not interested as we've been building our own.

Question - How will they be different from a normal car trailer from the local servo?
they might have twin motors :lol:
There's quite a few things you can do to a trailer that's different to the standard ones you hire.... . even possibly put a low mount on it (as someone suggested...hmm maybe this is where the twin motors could come in)...lol.....

Quite a few ppl have given me great ideas on what they look for in a trailer (width, as mentioned, weight capacity, storage....and so on..)
Not everyone can buy or build one.

What I'm working on isn't just for comp trucks and will be registered, engineered and with proper insurances that's required.
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Re: Comp Truck Trailers

Post by matt.mcinnes »

The_Wazza wrote:I'm preparing to make comp truck trailers to hire. Just wondering how much interest there is out there in doing this? Any suggestions are welcome.
They should be banned, all comp trucks should have to drive too and if possible from the event.

At least for winch challenges.

Too many trailer queens :D

Rock crawling buggies is a different matter.
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

this is the build on my trailer

http://www.rockcrawlingqld.com/Rock/e10 ... pic.php?29

another thing to consider is drop axles, this gets the whole trailer and load closer to the road.

and if you are goinng to hire it out, make sure that you number plates and all the lights are well protected.
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 214
Joined: Tue May 30, 2006 6:37 pm
Location: Gembrook,Vic

Re: Comp Truck Trailers

Post by Evil 73 »

matt.mcinnes wrote:
The_Wazza wrote:I'm preparing to make comp truck trailers to hire. Just wondering how much interest there is out there in doing this? Any suggestions are welcome.
They should be banned, all comp trucks should have to drive too and if possible from the event if they have leaf springs!!!!

At least for winch challenges.

I love trailer queens, and men .
Ben :finger:
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
Top
Posts: 240
Joined: Mon May 07, 2007 9:33 pm
Location: Sunbury, Victoria

Contact:
Contact The_Wazza

Re: Comp Truck Trailers

Post by The_Wazza »

matt.mcinnes wrote:
The_Wazza wrote:I'm preparing to make comp truck trailers to hire. Just wondering how much interest there is out there in doing this? Any suggestions are welcome.
They should be banned, all comp trucks should have to drive too and if possible from the event.

At least for winch challenges.

Too many trailer queens :D

Rock crawling buggies is a different matter.
Engineers would make a killing if this was the case. How many full on comp trucks are roadworthy....

Good job on your trailer Stika :cool:
www.flaminfabrications.com.au
Now available Faster Gearing for Highmounts!!!
0419 386 703
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: Comp Truck Trailers

Post by MissDrew »

The_Wazza wrote:How many full on comp trucks are roadworthy....
ZERO!!!!!!!!!!!!!!!!!!
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: Comp Truck Trailers

Post by bad_religion_au »

matt.mcinnes wrote:
The_Wazza wrote:I'm preparing to make comp truck trailers to hire. Just wondering how much interest there is out there in doing this? Any suggestions are welcome.
They should be banned, all comp trucks should have to drive too and if possible from the event.

At least for winch challenges.

Too many trailer queens :D

Rock crawling buggies is a different matter.
not everyone wants to run the gauntlet and get their rig defected.
Spit my last breath
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

The_Wazza wrote:
nzdarin wrote:I'll hire one off you! But you'll have to arrange to get it too me!!!!
lol... might have to ship it over to you.. :)
Hand luggage?
Are you still coming over for next weekend! I've got my truck running again with a new chassis and few other minor mods. It is amazing how much time goes into building a new chassis. I'm sure it was less to do first time around and second time was just copying the bent one. (with a few extra bits to strengthen it)
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

STIKA wrote:this is the build on my trailer

http://www.rockcrawlingqld.com/Rock/e10 ... pic.php?29

another thing to consider is drop axles, this gets the whole trailer and load closer to the road.

and if you are goinng to hire it out, make sure that you number plates and all the lights are well protected.
have you got some better pics of it?
how wide is the tray?

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

Comp trailer hire would be a good idea if the other 90 percent of the time you were hiring to Joe blogs the average user to pick up his restore's dream.
I think that a trailer has to be multi use to make you money. I would also keep it simple as in no winches or you pay extra hire fees for trailer with winch because the average user doesn’t care that the winch is getting hot or that they shouldn't winching on there 10 tonne tractor with a seized motor.
Reptile fabrication.
www.agroautomotive.net
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

jessie928 wrote:
STIKA wrote:this is the build on my trailer

http://www.rockcrawlingqld.com/Rock/e10 ... pic.php?29

another thing to consider is drop axles, this gets the whole trailer and load closer to the road.

and if you are goinng to hire it out, make sure that you number plates and all the lights are well protected.
have you got some better pics of it?
how wide is the tray?

JEs
the tray is 2.4 wide with removable guards so you can drive over the tyres
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

jessie928 wrote:
have you got some better pics of it?
how wide is the tray?

JEs
What exactly are you after

Protection for the tail lights

Image

protection for the clearance light, so people with big feet don't stand on them.

Two of my biggest issues were;
- replacing damaged electrics, lights and trailer plug
-trailer being rerturned covered in mud and oil

Image

Multipul tie down points

Image
Image

Drop axles like a portal in reverse

Image


I hope this helps
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests