Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series diff centre into 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

60 series diff centre into 80 series

Post by flyinwall »

will a 60 series center fit into my 80 series cruiser rear diff

yes i did search the bible and did a search
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 228
Joined: Sat Dec 11, 2004 9:36 am
Location: Latrobe Valley Victoria

Post by Troopy93 »

Yep it will fit.
93 1HZ Troopy Double Locked, Lifted and Gassed with NO Benefits by D-GAS

D-GAS= Dont - Give A Shit
Top
Posts: 175
Joined: Mon Apr 28, 2008 9:10 pm
Location: imbil

80 diff

Post by 60_series_united »

Troopy93 wrote:Yep it will fit.
is it just a matter of unbolting both centres and bolting the 60 centre into the 80 housing? cause im doin this and was told i would have to put my locker in the 80 centre cause the 60 centre wont bolt in to the 80 housing
Top
Posts: 228
Joined: Sat Dec 11, 2004 9:36 am
Location: Latrobe Valley Victoria

Post by Troopy93 »

Yes it should bolt straight in, some earlier diffs have different carrier bearings to later models, but I don't know if it will affect your locker installation.
93 1HZ Troopy Double Locked, Lifted and Gassed with NO Benefits by D-GAS

D-GAS= Dont - Give A Shit
Top
Posts: 37
Joined: Sun Jun 01, 2008 2:10 pm
Location: here

Post by arb383 »

the locker from your 60 will fit an 80 but you should only swap the air locker hemisphere only,not the entire centre.
that way you will be using the newer gearset and bearings from the 80 instead of the old stuff from the 60.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests