Hi all. Got one of these battery trays in for my 93 1.6L efi vit. Just wanting to check about fitment before i start drilling holes.
I plan to re-position the rad overflow somewhere else and...
Fit the tray in so that it is nearly up against the intake pipe where it goes through under the guard.
Drill two holes in the side wall of the engine bay in front of the shock tower
put two holes in the wheel arch and one hole in the lip that runs across the fire wall. I will replace the bolts with new HT's as per a previous post.
One question i have is would i be better off to have the bolt heads under the wheel arch with the thread poking into the engine bay to prevent tyre damage on the thread?
If anyone has pics of this tray installed in an EFI Vit I would love to have a look. The pic on the piranha website is rubbish and is a carbed vit anyway.
The lip running across the firewall doesn’t have much space to play with so a close up of that fitting would be nice.
Lastly has any one found an different wiper motor or modified the plug to allow a full size battery to be installed?
Many Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Piranha battery tray #BTSV for EFI Vitara
Who is online
Users browsing this forum: No registered users and 0 guests