G'day all,
The throw out bearing on the middy is buggered, so may aswell do the clutch at the same time,. Just wondering how invloved a clutch change for a middy is and any hot tips for doing it ? Would it be achievable without a hoist ? And can it be done by sliding the gearbox back on the cross member or is removal the bestchoice? A weekend (2 days) enough time to do it if all goes smoothly? Trying to weigh up if I do it myself of get a workshop to do it.
Any help appreciated!
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How involved is a clutch change any hot tips foor a middy
Moderators: toaddog, Elmo, DUDELUX
there easy 4 axel stands and a trolley jack will be ok you will need a couple of mates to help you out also whenremoving the gearbox its probably best to remove the fan off the front of the motor sounds silly but they can make a mess of your radiator if they dont clear when the engine is lowerd other than that easy 
Who is online
Users browsing this forum: No registered users and 1 guest