hi all
i have a 95 gxl 80 series with a after market safari turbo the turbo went on when it had 300000 thousand on it when i put the turbo on i took it to cooma diesel and they re set everything on it.the boost was set a 7pound and what ever they set the the fuel at since then i have up the boost to about 9and a half pound
but now i wont to do the fuel and was just wondering how far i should screw it
in with out hurting it since cooma did there work on it it has done about 180000 thousand kms with no trouble.cheers les
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 SERIES fuel screw
Moderators: toaddog, Elmo, DUDELUX
is the probe before or after the turbo?
if before, 650 - 700 is reasonably safe. if after, 600. opinions ill vary wildly. personally I would set it up for higher, then on cold days and/or at low altitude you can get the best out of it, and in more regular conditions, drive it to the gauge and back off when it gets uncomfortable.
if before, 650 - 700 is reasonably safe. if after, 600. opinions ill vary wildly. personally I would set it up for higher, then on cold days and/or at low altitude you can get the best out of it, and in more regular conditions, drive it to the gauge and back off when it gets uncomfortable.
Free air locker to the first 20 callers!
Ive been playing with my max volume fuel adjustment too., and it is real touchy....and real hard to set right if you dont get the proper spanners, you loose sight of the screw...and dont know where your at....1/4 turn will make a big difference., try less than that first...be prepared to take it out and replace the oring if it starts leaking like mine did...
Andrew
ps...another thing that it will upset is idle speed, so u need to adjust that back afterwards, as the max volume screw is adjusting max volume right across the range. When the motor is hot, free rev it up to the governor, and you will notice it will rev over the redline as it adjusts that too.
Andrew
Andrew
ps...another thing that it will upset is idle speed, so u need to adjust that back afterwards, as the max volume screw is adjusting max volume right across the range. When the motor is hot, free rev it up to the governor, and you will notice it will rev over the redline as it adjusts that too.
Andrew
Confucious say...man who argue with idiot, worserer himself
Who is online
Users browsing this forum: No registered users and 4 guests