Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ front end wider than a fj40 front end?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 19
Joined: Thu Aug 30, 2007 8:59 pm
Location: Kallangur

GQ front end wider than a fj40 front end?

Post by softshorty77 »

Is a gq front end wider than an fj40 front end? if so by how much? Considering coil conversion for the front. will the propellor shaft bolt up too?
Top
Posts: 257
Joined: Wed Aug 30, 2006 2:04 pm
Location: Box hill

G,Q vs toy.

Post by bad mudda »

My mate has 60s axle's with big offset on his rim's, and i have the GQ axle's with standard rims and mine is still wider by 30mm , so there must be atleast 3'' or 4'' in it.
My rig built by Agro Automotive http://www.outerlimits4x4.com/viewtopic.php?f=16&t=127032
DILLIGAF RACING
Thanks to- Advance custom concrete, Dobinsons suspension, Maxxis tyres.
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: G,Q vs toy.

Post by RAY185 »

bad mudda wrote:My mate has 60s axle's with big offset on his rim's, and i have the GQ axle's with standard rims and mine is still wider by 30mm , so there must be atleast 3'' or 4'' in it.
60 is about 3 inches wider than 40 so GQ has got to be a fair bit more than 3".
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest