Premature thanks.
Anyone converted thier pionts GQ 4.2 to electronic?
whats involved ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
electronic ignition in GQ
pertronix kits awsome, either the standard or lobe sensing.
The standard kit needs you to machine the shaft down so u can fit the spacer collor, not hard at all. I just hooked it up the dizzy up to a drill in the vice and spun it slowly while another person using the belt sander.
lobe sesning uses the orginal lobes that would normally lift the points, bit easier.
The standard kit needs you to machine the shaft down so u can fit the spacer collor, not hard at all. I just hooked it up the dizzy up to a drill in the vice and spun it slowly while another person using the belt sander.
lobe sesning uses the orginal lobes that would normally lift the points, bit easier.
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Who is online
Users browsing this forum: No registered users and 34 guests