Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sender for water temp guage - Vitara g16b

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 445
Joined: Mon Feb 11, 2008 9:54 pm
Location: Perth

sender for water temp guage - Vitara g16b

Post by PCRman »

Anyone know if an aftermarket sender for the temp guage is available to replace the one on the front of the thermostat housing? I snapped mine re-taping the loom :roll:

It is stamped with N6

Got a part number for aftermarket or genuine?
Top
Posts: 736
Joined: Sun Jan 30, 2005 2:32 pm
Location: brisbane

Post by gumtree »

they are all the same thread. bought an aftermarket one for my 1.6 efi motor for $33 from crazysales.com.au and it came with everything. best $33 mod ever!
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Top
Posts: 445
Joined: Mon Feb 11, 2008 9:54 pm
Location: Perth

Post by PCRman »

FYI.

Suzuki part umber for sender is

GM-3485050A00

Also the tridon sender TTS001 listed for "Vitara 1.6L SOHC Carb 7/88 to 12/98" does not read the correct scale for EFI.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 7 guests