75 diff centre in 80

[Ricko]

Hey just checking to see whether the rear diff centre in a 75 series (troopy, 2H, in case it matters) will fit in an 80 rear. It also has a lockright diff lock, will that cause any problems? Thanks heaps.

[mule75]

as long as the ratios match your front it will be fine.
the early 75 pinions are a smaller dia than the later(post 91) if you're going to put big hp through it.

[Ricko]

as long as the ratios match your front it will be fine.
the early 75 pinions are a smaller dia than the later(post 91) if you're going to put big hp through it.

Thanks mate

[Ricko]

as long as the ratios match your front it will be fine.
the early 75 pinions are a smaller dia than the later(post 91) if you're going to put big hp through it.

Thanks mate

[Ice]

4.11 vs 4.1 to if your going to get tecnical about it

[mule75]

i think some 75's had 4.3's but not sure what year.

[dow50r]

If its a part time 80, no prob, but if it is a constant, problems...all u would need to do is put the centre, bearings and all in your 80 ringear...