Page 1 of 1
75 diff centre in 80
Posted: Sun Jul 27, 2008 9:15 pm
by Ricko
Hey just checking to see whether the rear diff centre in a 75 series (troopy, 2H, in case it matters) will fit in an 80 rear. It also has a lockright diff lock, will that cause any problems? Thanks heaps.
Posted: Sun Jul 27, 2008 9:39 pm
by mule75
as long as the ratios match your front it will be fine.
the early 75 pinions are a smaller dia than the later(post 91) if you're going to put big hp through it.
Posted: Mon Jul 28, 2008 9:11 pm
by Ricko
mule75 wrote:as long as the ratios match your front it will be fine.
the early 75 pinions are a smaller dia than the later(post 91) if you're going to put big hp through it.
Thanks mate
Posted: Mon Jul 28, 2008 9:13 pm
by Ricko
mule75 wrote:as long as the ratios match your front it will be fine.
the early 75 pinions are a smaller dia than the later(post 91) if you're going to put big hp through it.
Thanks mate
Posted: Tue Jul 29, 2008 1:07 pm
by Ice
4.11 vs 4.1 to if your going to get tecnical about it
Posted: Tue Jul 29, 2008 9:31 pm
by mule75
i think some 75's had 4.3's but not sure what year.
Posted: Tue Jul 29, 2008 9:41 pm
by dow50r
If its a part time 80, no prob, but if it is a constant, problems...all u would need to do is put the centre, bearings and all in your 80 ringear...