Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Warn Winch broken handle

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 7
Joined: Fri Mar 07, 2008 7:01 pm
Location: Melbourne

Warn Winch broken handle

Post by ben4386 »

Hi ive got a warn 9000 pound low mount winch and the freewheel knob is starting to seize and is now damaged. Would anyone know how to replace this?

Also how would I go about servicing my winch

Ive had a good look and cant really find any info, so any help is much appreciated

Ben
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Is this your model , Cheers Paul.


http://www.jonfund.com/technical/winchteardown.shtml
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

If the freespool is starting to sieze its probably due to water ingress and the sliding ring is rusted in place. Pull the gearbox off and strip it down to check.

If you have damaged the handle by trying to force it a new one is about $150!
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests