Outer Limits 4x4 Board

I new to this whole turbo diesel game, i have recently bought a GQ wagon with the TD42 and safari turbo kit. i was thinking of putting a boost gauge on it for curiosity sakes really, and i was wondering where to "tap" the gauge off.
there is the outlet on the intake manifold for the boost compensator on the fuel pump and im assuming that if i changed it to a "T" piece it would be a fine spot to get the feed for the gauge. here is a pic:

That spot should be all good shouldnt it.
thanks.
nibbsy

I have a 4.2 Turbo GU.
And that were i "T" mine into.
Some may say its not the right place, but it worked fine for me and didnt upset the tuning of the fuel delivery!

Grant.

yep that will work fine there

obviously the closer to the intake the better

what about the waste gate hose?

that is a possibility, but the manifold is easier and more accesible. I am lazy you know
will look into it i guess, thanks for the replies
just a quick question too, should i use sealing tape on the connection into the manifold such as gas thread tape?
cheers
nibbsy

Yes