Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What gas to use with TIG and mild steel?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

What gas to use with TIG and mild steel?

Post by ausyota »

Im thinking of getting a little CIG Weldskill 170 inverter welder from work.
I am going to get the TIG torch kit with it.
I have never TIG welded before only MIG and Stick.
I have a bottle of Argoshield Universal that I use with my MIG will that be OK to use with the TIG just on mild steel?
I dont really want to have to fark around with the rental on another bottle just for me to learn to tig and do the occasional weld.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 96
Joined: Tue Mar 04, 2008 6:29 pm
Location: Melbourne

weld

Post by adam big lad »

hi made a welder by trade and you'll be fine with that set up
adam
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Re: weld

Post by awill4x4 »

adam big lad wrote:hi made a welder by trade and you'll be fine with that set up
adam
No he won't, you'll never get by with using Argoshield for Tig welding it will contaminate the tungstens pronto.
Welding grade Argon is the best gas to use, Helium can be used but the cost is prohibitive and the only real benefit of Helium is on thicker Aluminium sections.
Regards Andrew. (a "tig" welder by trade)
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Re: weld

Post by ausyota »

awill4x4 wrote:
adam big lad wrote:hi made a welder by trade and you'll be fine with that set up
adam
No he won't, you'll never get by with using Argoshield for Tig welding it will contaminate the tungstens pronto.
Welding grade Argon is the best gas to use, Helium can be used but the cost is prohibitive and the only real benefit of Helium is on thicker Aluminium sections.
Regards Andrew. (a "tig" welder by trade)
So could I get by using straight Argon on the MIG as well?
Having just the one bottle is what Im trying for.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 5
Joined: Sat Jul 05, 2008 5:51 pm
Location: south coast

Post by madpaje »

straight argon for both will be fine (sheety by trade)
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

So how does changing the gas with MIG affect the weld properties?
I see you can get argoshield universal, argoshield light, argon, CO2 etc etc.

I understand Argoshield light is better for thin materials but why?
Is the gas not just an inert gas for shielding the weld from oxygen?

How will my MIG welds differ if I use argon instead of universal?

Sorry for all the questions guys but I work in a shop that sells welders and this info is really helpfull not just for me but the customers I look after.
Cheers
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 12
Joined: Tue Jul 29, 2008 2:18 pm
Location: tas

tig

Post by 350hplux »

been a bm/w for 30 yrs , use argon for the tig but only use it on the mig when you are welding aluminium. you will get a rank weld using argon on the mig ,welding mild steel. it sucks i know but you will need 2 bottles . cheers darin
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Re: tig

Post by bru21 »

350hplux wrote:been a bm/w for 30 yrs , use argon for the tig but only use it on the mig when you are welding aluminium. you will get a rank weld using argon on the mig ,welding mild steel. it sucks i know but you will need 2 bottles . cheers darin
I agree, always have a go with argon when I run out the other bottles. always marginal.

argon for tig, universal for mild steel.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 96
Joined: Tue Mar 04, 2008 6:29 pm
Location: Melbourne

welding

Post by adam big lad »

sorry miss read question :oops: awill4x4 is right you will get a pox weld sorry adam
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

ausyota wrote:So how does changing the gas with MIG affect the weld properties?
I see you can get argoshield universal, argoshield light, argon, CO2 etc etc.

I understand Argoshield light is better for thin materials but why?
Is the gas not just an inert gas for shielding the weld from oxygen?

How will my MIG welds differ if I use argon instead of universal?

Cheers
Paul.
Different names for different gas mixes.

Shielding is the main reason but not the only reason, for using a certain gas for doing a welding process.

Using Pure Argon will give less splatter.

The answer is there, if you know why.
Posts: 271
Joined: Wed Aug 30, 2006 8:15 pm
Location: LLANDILO N.S.W 2747

.

Post by lukes4x4 »

I`d only use pure argon otherwise it will blow out everywhere. can use it also on chromoly and stainless.
LUKEYS 4X4 CUSTOMS - 0409 991742
LLANDILO N.S.W 2747 - SYDNEY
www.lukeys4x4.com
HARDCORE GEAR AND SUSPENSION
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

Post by 85lux »

argon is significantly more expensive than argoshield.... argon for tig, argoshield for mig.
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

85lux wrote:argon is significantly more expensive than argoshield.... argon for tig, argoshield for mig.
Unfortunately is a case of the gas companies gouging as much money out of the end user as possible. At work we used to use BOC but their prices got way out of hand, over $100 at the moment for "G" sized bottles. The equivalent from Air Liquide now is $55ish for us but we use a fair amount, I'm using a bottle every 2 weeks or so.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

awill4x4 wrote:
85lux wrote:argon is significantly more expensive than argoshield.... argon for tig, argoshield for mig.
Unfortunately is a case of the gas companies gouging as much money out of the end user as possible. At work we used to use BOC but their prices got way out of hand, over $100 at the moment for "G" sized bottles. The equivalent from Air Liquide now is $55ish for us but we use a fair amount, I'm using a bottle every 2 weeks or so.
Regards Andrew.
Yes but your drinking it :D
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Posts: 141
Joined: Fri Nov 12, 2004 4:46 pm
Location: Newcastle

Post by mickbeny »

Hi all...Awill4x4,I used to use a bottle a day,lol.
PEACE...
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

mickbeny wrote:Hi all...Awill4x4,I used to use a bottle a day,lol.
well rar rar rar i use a gazillion bottles +2 every day so nerr....


lol J/K
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

..... as for what was actually asked, why use different types of gases?..
well different gases give different finishes, different level of potential pentration due to burning hotter.... in the 4 state of matter, don't ask, some mig and some tig a coctail mixes to achieve different results and different chemical make of materials being fused, as for names that is gas company origanated branding... :armsup:

Tig for mild steel and stainless.... stick with Argon only ( peacock blue bottle) ... ;)

that is all
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 59
Joined: Sat Jul 30, 2005 7:00 pm
Location: wollongong nsw

Post by nick bj40 »

hey guys just what i was looking for iv got the cig inverter welder ausyota is talkin about

what i would like to kno is which is the best tungsten ive been led to beleve the red tip electrodes?? is this right mainly (like 99%) mild steel
82 MQ SD33T, 5 speed, 4.6 diffs, 50mm spring, 40mm body, front extened 50mm, 35' trapdors (awsum) just lovin getin out there
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

I ordered my welder today through work.
It is a brand new model on the market a Weldskill 170HF.
It comes as a complete kit with all the TIG stuff as well as stick and is a High Frequency machine that is suposed to be the ducks nuts for a cheapy.
I have also found someone with a bottle of argon that they dont use anymore that said I can finish it off and give them back the bottle to take back :armsup:
So that gives me a chance to get started and if its a good thing I will invest in a bottle of my own.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 59
Joined: Sat Jul 30, 2005 7:00 pm
Location: wollongong nsw

Post by nick bj40 »

kool thats good can you tell me more about the welder? like duty cycle, price and about how big it is please and is the high frequency a sperate box or is it built in???
82 MQ SD33T, 5 speed, 4.6 diffs, 50mm spring, 40mm body, front extened 50mm, 35' trapdors (awsum) just lovin getin out there
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

nick bj40 wrote:kool thats good can you tell me more about the welder? like duty cycle, price and about how big it is please and is the high frequency a sperate box or is it built in???
I dont know any details as yet untill I get hold of it.
I just rang up our CIG sales rep and told him I was thinking of getting the TIG stuff for the 170 invertor for myself and he said to get this new one cause its heaps better.
He is doing me a good price too :D
More details and pics when it shows up.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 141
Joined: Fri Nov 12, 2004 4:46 pm
Location: Newcastle

Post by mickbeny »

Hi all...nickbj40,yes the red tip is Thoriated tungsten,good for stainless mildsteel copper ect DC applications.
PEACE...
Posts: 59
Joined: Sat Jul 30, 2005 7:00 pm
Location: wollongong nsw

Post by nick bj40 »

mickbeny sweeet thanks mate

ausyota just bought one of the 170 inverter and i got the tig kit a mask and a regulator with it for $750 i was stoked and now there is a new 1 :armsup: and for wat i could find on the net last nite its hf, same size couldnt find a duty anywhere but how good these little buggers are i think that might be my next step up so keep us informed plz
82 MQ SD33T, 5 speed, 4.6 diffs, 50mm spring, 40mm body, front extened 50mm, 35' trapdors (awsum) just lovin getin out there
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests