Just a quicky. I have reassembled my auto free wheeling hubs after having them on the bench in bits for 6 months. I think I may have got something wrong though as they click quite a bit. Does anyone have an exploded diagram of them they can post up please. There is one washer in there I am unsure of where it went. The diagram I have in a manual is for another type of auto hub! It also says you can put the hub in the lock position to disassemble. How do you do this. I assume you turn the bolt in the end but any text that may have been there before has long since gone!
Thanks for any help
Mark
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Auto free wheeling hubs, how to put together
Who is online
Users browsing this forum: No registered users and 2 guests