Hey peoples. I'm getting a new draglink and tierod soon and was just wondering about installing them.
Is it just a case of adjusting tierod ends so the length is that stated in Gregory's manual (1570mm i think). Then after attaching tierod at that length adjust the draglink as required and fit it. Then get wheel alignment done?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
draglink & tierod install?
draglink & tierod install?
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
are you getting new tierods at the same time? if so pop the old one out and adjust the new one so length is very close,
the goiod thing is if your careful, your wheels will not move and park it with the steering wheel in the locked position, dont move anything and ajust till the slip into place,
best bet is to fit em up on friday night, wheel aling on saturday morning
the goiod thing is if your careful, your wheels will not move and park it with the steering wheel in the locked position, dont move anything and ajust till the slip into place,
best bet is to fit em up on friday night, wheel aling on saturday morning
Who is online
Users browsing this forum: No registered users and 2 guests