Guys need your thoughts and experience .At the momment im running a 4 inch lift and 3 1/4 body lift on 35 Centapeeds .I want to go bigger but dont no wether to by 36 Centapeeds or 38 swampers or if 38s wont fit somthing in the 37 inch range.
Dose anyone run 36 Centapeeds who ran 35s before as the 3 blocks in the center of the tread just look to close together more like a large hunck of rubber was thinking it would just spin and not get traction when wet and muddy .Also what are the actual sizes i no a 35 Centapeed is actualy smaller were a 36 is bigger than quoted how about the swampaers and were is the best place in aus to by swampers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Will 38s fit
cbr wrote:But what are the actual size of the 38" swampers. From my reading on pirate the 38 x 12.5 are very small and are around the 36-37" in height.
But I think the 39.5's are very close the the advertised size.
Duncan you definately need larger tyres, it would make the patrol look very cool
Chris.
they measured 36 5/16" at 20psi on the truck and 37 3/4" off the truck.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
event pics http://bigred.redbubble.com/
The spec sheet for TSLs state that 38s are actualy 37.8 inches and 36s are actualy 36 .3 or that was what i was told .Have been reading everything about swampers is it true that Boggers arent that good on side slopes ?
Cheezy how much cutting of the guards did you have to do ?
Wendle what 37s were you running and did you do much chopping .
Anyone no the price of 38s is it worth while going TSL SXs or just stay with the TSLs
Cheezy how much cutting of the guards did you have to do ?
Wendle what 37s were you running and did you do much chopping .
Anyone no the price of 38s is it worth while going TSL SXs or just stay with the TSLs
Dont believe everything you read 
Most swampers dont measure what the specs say they do, eg 33 TSL was 34.5 and a 36 TSL was also 34.5, 38.5 TSL was 37.5 but a 38.5 bogger was 38.5. 2 of my 37 boggers were 36 and the other 2 were 37.2, 39.5 were 39 and the 42's are 41, but it does depend on the rim size you are using.
MT bias 35 are 34.2 and 37 are 36.2 but the radial claws are spot on.
Simex are spot on in the height but are wider than they say.
As for boggers on side slopes, they are ok with a light rig but with a heavy one not so good. You cant beet them in boggy shyt or in a rut where the side lugs can bite in and also if you have good HP.
As for cutting of the guards, there wasnt too much cutting but the rear wheel arches were tubbed.
If you want prices give me a buzz on Tuesday at work. 03 97618111.
Most swampers dont measure what the specs say they do, eg 33 TSL was 34.5 and a 36 TSL was also 34.5, 38.5 TSL was 37.5 but a 38.5 bogger was 38.5. 2 of my 37 boggers were 36 and the other 2 were 37.2, 39.5 were 39 and the 42's are 41, but it does depend on the rim size you are using.
MT bias 35 are 34.2 and 37 are 36.2 but the radial claws are spot on.
Simex are spot on in the height but are wider than they say.
As for boggers on side slopes, they are ok with a light rig but with a heavy one not so good. You cant beet them in boggy shyt or in a rut where the side lugs can bite in and also if you have good HP.
As for cutting of the guards, there wasnt too much cutting but the rear wheel arches were tubbed.
If you want prices give me a buzz on Tuesday at work. 03 97618111.
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
The person who says it cannot be done should not interrupt the person doing it.
Thanks Cheezy will give you aring tomorrow about 38s.Im running 15x8s but have put beadlocks on so they are a bit wider.Also have cut my guards front and rear for more clearance horozontaly.With running 38s how much will it affect my low range ,at the momment ive got 4.6s in the diffs dont no wether to do the transfercase as well
If you have a standard motor you will think it is a bit of a slug, its the same as going from 31's to 34's with standard gearing.
I think you should go kevlar everything and a 500 HP chev, or then again you could just by my Mav.
I think you should go kevlar everything and a 500 HP chev, or then again you could just by my Mav.
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
The person who says it cannot be done should not interrupt the person doing it.
Would love to fit another 6.2 diesal but no do for that .But the wife said yesterday that i should maybe go buy a play truck dergeo it and go wild with it and to it every were because the GQ is getting to dented and we have to use it to go round NSW and VIC next year on a 3 month trip toeing a camper might just have to by me a bunger
Who is online
Users browsing this forum: No registered users and 1 guest