Page 1 of 1
LT 95 into 84RR
Posted: Thu Aug 07, 2008 8:56 pm
by D2MUCH
Ive aquired a 84 Rangie
its an Auto (Tourqflite 3 Spd)
I want to put an LT95 4spd into the old girl is this possible
if so what apart from the clutch pedal assembly will I need
Im sourcing the gearbox from an Stage 1 V8
Cheers Ken
Posted: Thu Aug 07, 2008 11:33 pm
by Loanrangie
They came with an lt95 prior to 84 so wont be a problem, you may need the shafts from a manual rangie though, also possibly the tranny mount brackets will be different to the stage 1.
Posted: Fri Aug 08, 2008 9:00 am
by D2MUCH
When you say shafts Ill assume propshafts ?
Posted: Fri Aug 08, 2008 5:13 pm
by Loanrangie
D2MUCH wrote:When you say shafts Ill assume propshafts ?
Correct,was too late to type long words
.
Posted: Thu Aug 14, 2008 9:05 pm
by Mark2
You may already be aware, but the stage 1 box has a much lower transfer ratio than a rangy LT95 (about 30% lower) - good if you want to run 33's or bigger but you might find it too low otherwise.
Posted: Thu Aug 14, 2008 11:18 pm
by D2MUCH
No cobba I wasnt aware of the difference in transfer ratios thanks for that
I will definately be running 35s on this puppy
