Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LT 95 into 84RR

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 41
Joined: Tue May 20, 2008 7:43 pm
Location: Armadale WA

LT 95 into 84RR

Post by D2MUCH »

Ive aquired a 84 Rangie :D its an Auto (Tourqflite 3 Spd)

I want to put an LT95 4spd into the old girl is this possible

if so what apart from the clutch pedal assembly will I need

Im sourcing the gearbox from an Stage 1 V8

Cheers Ken
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

They came with an lt95 prior to 84 so wont be a problem, you may need the shafts from a manual rangie though, also possibly the tranny mount brackets will be different to the stage 1.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 41
Joined: Tue May 20, 2008 7:43 pm
Location: Armadale WA

Post by D2MUCH »

When you say shafts Ill assume propshafts ?
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

D2MUCH wrote:When you say shafts Ill assume propshafts ?
Correct,was too late to type long words :) .
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

You may already be aware, but the stage 1 box has a much lower transfer ratio than a rangy LT95 (about 30% lower) - good if you want to run 33's or bigger but you might find it too low otherwise.
Posts: 41
Joined: Tue May 20, 2008 7:43 pm
Location: Armadale WA

Post by D2MUCH »

No cobba I wasnt aware of the difference in transfer ratios thanks for that :changes: I will definately be running 35s on this puppy :armsup:
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests