Any one used these?
How do they perform? Hard? Soft? flex any good? sag?
Thinking of getting a set for my 96 leaf sprung hilux and wondering if anyones could any feed back.
May run them with 2 inch extended shackles to fit 33s but will see how i go.
Cheers, Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3 inch hilux EFS leafs?
Moderators: toaddog, Elmo, DUDELUX
Re: 3 inch hilux EFS leafs?
good flex but they do not carry loads.dan_2818 wrote:Any one used these?
How do they perform? Hard? Soft? flex any good? sag?
Thinking of getting a set for my 96 leaf sprung hilux and wondering if anyones could any feed back.
May run them with 2 inch extended shackles to fit 33s but will see how i go.
Cheers, Dan
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Re: 3 inch hilux EFS leafs?
Thanks JOHNZ,JOHNZ wrote:good flex but they do not carry loads.dan_2818 wrote:Any one used these?
How do they perform? Hard? Soft? flex any good? sag?
Thinking of getting a set for my 96 leaf sprung hilux and wondering if anyones could any feed back.
May run them with 2 inch extended shackles to fit 33s but will see how i go.
Cheers, Dan
Load carrying not really needed, flexy without sag is what im after.
Do you sell these, if so how much? PM if needed.
Cheers, Dan
Who is online
Users browsing this forum: No registered users and 0 guests