Page 1 of 1
Ball joint spacers D22
Posted: Fri Aug 08, 2008 10:19 am
by bravo
Got a 2005 D22 navara and was wondering if anyone had fitted ball joint spacers to lift the front end. I was only going to lift it 40mm. I was thinking a spacer would be better than winding up the torsion bars.
Any thoughts?
Posted: Fri Aug 08, 2008 7:05 pm
by Offroad-Events
BJ spacers won't really work with the stock UCA's as the BJ's are pressed in the UCA's. You can get aftermarket UCA's which use the D21 BJ's and spacers can be used then. I run 2" spacers in my R20 Terrano for 2 years now and I'm happy with them.
Posted: Mon Aug 11, 2008 4:38 pm
by bravo
did you have to modify anything else to fit them, like lower the mounts for the sway bar?
Posted: Mon Aug 11, 2008 8:06 pm
by Offroad-Events
bravo wrote:did you have to modify anything else to fit them, like lower the mounts for the sway bar?
I run custom made sway bar mounts, stock ones are too short for 3" lift in the front.