Got a 2005 D22 navara and was wondering if anyone had fitted ball joint spacers to lift the front end. I was only going to lift it 40mm. I was thinking a spacer would be better than winding up the torsion bars.
Any thoughts?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ball joint spacers D22
Ball joint spacers D22
FJ73 2inch lift climax shackles, 2inch body lift, 33 muddies
BJ spacers won't really work with the stock UCA's as the BJ's are pressed in the UCA's. You can get aftermarket UCA's which use the D21 BJ's and spacers can be used then. I run 2" spacers in my R20 Terrano for 2 years now and I'm happy with them.
'04 Nissan Terrano 3.0Di ZD30 *pimped*, some Zooks & '87 GQ
Who is online
Users browsing this forum: No registered users and 127 guests