Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

after market seats

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
jap
Posts: 42
Joined: Tue Jan 15, 2008 12:47 pm
Location: brisbane

after market seats

Post by jap »

hi there just got some new seats and was wondering if anybody makes a aftermarket rails for swb gq any info would help also in brissy area
Posts: 13
Joined: Sat Jan 19, 2008 2:34 pm
Location: geelong

Post by Ashleyhj74 »

I put some aftermarket seats into my gu, i was goin to modify the bases etc, but that kinda falls under the "illegal" side of the law here in vic. I had to end up buyin bases off Paratus seats, $170 each. More than i wanted to spend, but, they have the "ADR approved" sticker on them, and they bolted straight up to my seats.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Ashleyhj74 wrote:I put some aftermarket seats into my gu, i was goin to modify the bases etc, but that kinda falls under the "illegal" side of the law here in vic. I had to end up buyin bases off Paratus seats, $170 each. More than i wanted to spend, but, they have the "ADR approved" sticker on them, and they bolted straight up to my seats.
yup, did the same.. got em from ARB
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

has any one ever taken the old seats to an upolsterer?

and turned the orgininals into race seats with holes n stuff for harnesses?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Hoonz wrote:has any one ever taken the old seats to an upolsterer?

and turned the orgininals into race seats with holes n stuff for harnesses?
at a guess it would cost a whole host more than new seats..
had my rodeo seats rebuilt, and it wasnt cheap just for that, letalone holes for harnesses
Posts: 107
Joined: Sun Apr 09, 2006 10:03 am
Location: europe

Post by Rampage »

Ashleyhj74 wrote:I put some aftermarket seats into my gu, i was goin to modify the bases etc, but that kinda falls under the "illegal" side of the law here in vic. I had to end up buyin bases off Paratus seats, $170 each. More than i wanted to spend, but, they have the "ADR approved" sticker on them, and they bolted straight up to my seats.
hey mate im getting a set of these bases for my gu and they said same price $170 for base but also said option of a slider for extra $145!

do your seat bases adjust at all? or would i need this slider seperate!

cheers cam
Posts: 13
Joined: Sat Jan 19, 2008 2:34 pm
Location: geelong

Post by Ashleyhj74 »

G'day mate, i got my seats from The Motorshed down here in Geelong, they came with sliders/rails. Now, i consulted a engineer on this, and he said as long as you dont take a welder to the bases, he and the law are cool with that. The rails i got with the seats were about 10mm to narrow to suit the bases. So i got a couple of strips of plate, some high tensile bolts, and bolted it all up, no welder :) The steel i used is stronger than the stuff used in the bases, so i have no concerns there, and apparantly bolts are fine (yeah, checked on doin it this way too, and it was ok apparantly).
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

I got recaro bases with my recaro seats. And I am going to have to have a fiddle with the drivers side. As its like driving a defender, being pushed up against the door. But there is ample room down between the seat and the center console.
So I think they could have moved them over a little more. Would have also made the seat inline with the steering wheel. Which most after market seats arnt (Paratus, Aerotech & Recaro).
THOUGHT FOR THE DAY....
jap
Posts: 42
Joined: Tue Jan 15, 2008 12:47 pm
Location: brisbane

Post by jap »

thanks for your help going to see arb tom and see what they have if not custom ones for me might be even able raise the height a bit as i am short !!!!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests