Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HELP - Rodeo CV shaft removal

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 159
Joined: Sun Sep 17, 2006 12:23 am
Location: Tamworth, NSW

HELP - Rodeo CV shaft removal

Post by ricky1970 »

Just tryin to replace the CV shafts on my TF ('99) Rodeo. Anyone know what hold the shafts in the diff housing???? There are two circlip (?) grooves and a bearing surface in the new shafts behind the inner CV housing. I take it there is a bearing there. Di i have to drop the diff housing mount brackets and lower the housing to get to these???

Thanks
Rick
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Not 100% about Rodeo's but CV's are usually just clipped in.
Yank on them hard enough and they pull out.
Jas.
Top
Posts: 159
Joined: Sun Sep 17, 2006 12:23 am
Location: Tamworth, NSW

Post by ricky1970 »

Tried just popin em out, and when you take out the retaining ring they do come out. But my (non-genuine) CV shafts have differant CV's so i can't leave the old axle shaft there and just put the new CV half into it :x

Looks like i will have to drop the whole diff to get them out.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests