Has anyone used it?
I was thinking of buying it but at $180 us I want to make sure its worth it.
Using a JD2 model 3 to build a buggy. 3 different tube diameters.
Can I download a sample / shareware anywhere?
cheers bru
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bend-Tech
Moderators: toaddog, TWISTY, V8Patrol, Moderators
got it installed but haven't used it in ages..
its real easy to make up complex bends and the simulator is good too..
you can download a demo which allows you 15 uses (counted each time you start the program, so just dont shutdown/restart your pc)..
i reckon it would be well worth it if you do a lot of bending.
http://www.2020softwaresolutions.com/prod04.htm
its real easy to make up complex bends and the simulator is good too..
you can download a demo which allows you 15 uses (counted each time you start the program, so just dont shutdown/restart your pc)..
i reckon it would be well worth it if you do a lot of bending.
http://www.2020softwaresolutions.com/prod04.htm
The Bendtech site looks like it needs some maintenance?
Found this site hosting the demos
http://www.medfordtools.com/bendtech/index.html
Found this site hosting the demos
http://www.medfordtools.com/bendtech/index.html
Who is online
Users browsing this forum: No registered users and 3 guests