Hi
I am getting some longer axles made for the heavy duty axle and cv's i have , for a samurai from the states , roadless gear . The original axles and cv's did not come with a clip to lock the cv onto the axle . I thought I had read somewhere not to use one but I thought they were talking about the clip out at the hub . Can anyone confirm if I need a c clip to hold the axle to the cv , I am guessing so .
Cheers
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
C Clip with H/duty axles
I would guess so too.
I broke one of mine (CTM shafted doubletoughs) when I pulled them apart to have a look.
I was able to use a clip off a stock sierra CV. It was fine.
Steve.
I broke one of mine (CTM shafted doubletoughs) when I pulled them apart to have a look.
I was able to use a clip off a stock sierra CV. It was fine.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 2 guests