*Does the 1.3 seirra head fit on a 1.6 vitara for better performance or am i better off rebuilding a 1.6 vitara motor (eg. shaved head,pistons,cams etc..)
*Do 1300 extractors fit on a 8V 1.6 head?
*Do any external changes have to be made to the 1.6 (eg hoses,dizzy,anything) to fit in the sierra?
*Do the sierra inlet/exhaust manifolds bolt onto a vit head or do i need vit manifolds?
*Can i use the sierra carby?
thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G16 BUILD questions
G16 BUILD questions
Last edited by zookkid on Fri Sep 12, 2008 6:03 pm, edited 1 time in total.
FOR SALE
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
Yes both heads fit on both blocks and the manifolds interchange.
The external changes to the 1.6 required are only to the sump and oil pick up, nothing to the head/rest of the motor, and the RHS engine mount on the chassis has to be moved forward about 30mm.
The 1.3 head has smaller valves so is better for torque but both heads are basically the same so if you had a whole 1.6 I don't think I'd bother messing with it - just put it in compete and call it good.
Distributor interchanges between either head but the fuel pumps are different.
Steve.
The external changes to the 1.6 required are only to the sump and oil pick up, nothing to the head/rest of the motor, and the RHS engine mount on the chassis has to be moved forward about 30mm.
The 1.3 head has smaller valves so is better for torque but both heads are basically the same so if you had a whole 1.6 I don't think I'd bother messing with it - just put it in compete and call it good.
Distributor interchanges between either head but the fuel pumps are different.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
so i can use my 1.3 inlet, and use some 1.3 extractors.
so all i would need is a fuel pump for a 1.6?
can i use the sierra carby?
i am planning on buying a 1.6 motor to build:
what kind of performance pistons are out there for them? (i want high comp. pistons;eg flat top,dome??)
so all i would need is a fuel pump for a 1.6?
can i use the sierra carby?
i am planning on buying a 1.6 motor to build:
what kind of performance pistons are out there for them? (i want high comp. pistons;eg flat top,dome??)
FOR SALE
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
What motors have you priced up zookid?
Carbs tend to be abit moody on jolty rock hills, flood etc..
No matter what carbies..
Hence why i went efi..But i do realise u need it for a w'end swap!
If i was in your position, I would just bolt in a 1.6 carb with the adaptors etc
Then later on go the 16valve head with the efi when more time is organised..
Carbs tend to be abit moody on jolty rock hills, flood etc..
No matter what carbies..
Hence why i went efi..But i do realise u need it for a w'end swap!
If i was in your position, I would just bolt in a 1.6 carb with the adaptors etc
Then later on go the 16valve head with the efi when more time is organised..
I am Tim
I know that a 1.6 8-valve carby head will fit onto a 1.6 16v block, though it would then become an interference engine.
The sierra head will bolt on, but I dont know how different it is compared to a 8v vitara head, so am unsure if there would be any extra clearance issues i.e. between valves and pistons
The sierra head will bolt on, but I dont know how different it is compared to a 8v vitara head, so am unsure if there would be any extra clearance issues i.e. between valves and pistons
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
which equates to bugger all in the real world. why would you put so much time and effort into shaving, valving and head swapping to build a bitsa engine? if you are going to go to that effort, go efi. i also needed to do a minimal downtime swap in my ute, so i did all the adapting, wiring and stuffing about in the shed and had the engine, gearbox and loom running on the floor before i put a spanner on the ute. this meant a 2 day swap, and that was into a 1lt chassis which was a bit more stuffing aboutzookkid wrote:this guy at the suzuki wreckers said the differance is the conrods,piston and there is a weight on the crank.yer..
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
yer ill prob just leave the engine mostly standard.prob jus regrind the cam or summin not too extreme,just want a bit more get up and go than the old 1.3,the reason im stayin carby is that the cheapest g16b i can find is $1500 and ino if i can get a g16a cheap i will rebuild it for cheaper than that and have a brand new motor and the 16 valve heads like to crack 
,says my mate who works on heads all day long....
,says my mate who works on heads all day long....FOR SALE
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
They'll only crack if you overheat them. I highly doubt you'll get anywhere near as much power from a worked 1.3 than a standard 1.6efi, unless you go turbo/supercharger, which would be more exy and complicated than just doing the 1.6efi swap.
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
I REALY just wanna go 16b but the fu*kers down at the wreckers want 1850 for an engine!!! AND LAST WEEK IT WAS 1500 , a few weeks before:1250!! not long before that 1100!!!! wtf is goin on!! they told me "oh there getting harder to find" - what since last week??? if any one knows of 1 goin cheap give us a pm!
FOR SALE
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
93' WT hardtop.2" leaves,2" shackles,2'' body lift,31' bighorns.
g16a vitara motor
I just did the g16a swap, well worth it heaps more power, even with the new 31's on. I brought my motor 2 weeks ago from checkered flag wreckers at smithfield complete with alternator, fuel pump, extractors and carby, exactly as you pull it out for $850. You need the vitara alternator because the belts are notched not V like the sierra.
Theres a bloke on ebay that sells conversion kits from new zealand for $200, well worth it, good instructions and everything you need.
Theres a bloke on ebay that sells conversion kits from new zealand for $200, well worth it, good instructions and everything you need.
Maby your giving them the shits asking them how much for the engine every weekzookkid wrote:I REALY just wanna go 16b but the fu*kers down at the wreckers want 1850 for an engine!!! AND LAST WEEK IT WAS 1500 , a few weeks before:1250!! not long before that 1100!!!! wtf is goin on!! they told me "oh there getting harder to find" - what since last week??? if any one knows of 1 goin cheap give us a pm!
Trying to finish the Zook
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
No the 1600 crank will not fit into the 1300 block.jonno_racing wrote:SO, if u get a 1600 crank, rods and pistons...
u can then put all this in your 1300... and efectivly be a 1600?
and still have the corect engen number on the side? no need for engnering? this is what im thinking atm...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
The answers your after.
http://www.outerlimits4x4.com/ftopic139560-0-0-asc-.php
http://www.outerlimits4x4.com/ftopic3201-0-0-asc-.php
http://www.outerlimits4x4.com/ftopic139560-0-0-asc-.php
http://www.outerlimits4x4.com/ftopic3201-0-0-asc-.php
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 69 guests