Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body lifting
Moderator: Micka
body lifting
found a nice easy way to make up spacers for a body lift kit..go to a plastics supplier and buy the right stuff in long lengths its 2" diameter and u cut it off in the lift size u want with a drop saw..use a drill press to get a good accurate hole..we made up 10 spacers for mates gq lwb in about 15 mins....spacers cost all up about $30 and can be cut to suit any height u want.....
Who is online
Users browsing this forum: No registered users and 5 guests