Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Another coil conversion for Sierras

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Another coil conversion for Sierras

Post by grimbo »

Ransom note = demand + collage
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

got anti squat?
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

apparently that's the rear coil setup that rocky road used to sell, made the rear hike up pretty good when you accelerated and used to chew the bushes out really really quick ...

flexed well on the ramp, did not work that great on the trail .
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 266
Joined: Sun Jul 13, 2003 7:56 pm
Location: Gold Coast

Post by Bazooka »

That kit was designed and made by jake palmberg from higher heights offroad which no longer exists.
Havent seen one of them for years now.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Bazooka wrote:That kit was designed and made by jake palmberg from higher heights offroad which no longer exists.
Havent seen one of them for years now.


yeah I was looking for a pic of his new Zuk and found a link to his instead
Ransom note = demand + collage
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Re: Another coil conversion for Sierras

Post by OVERKILL ENG »

OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

I saw a prototype of this setup in 99.....

Never worked, B-I-G binding
Gone drag racing......
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

What they said...


Nice a-frame :roll: :P
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

grimbo wrote:
Bazooka wrote:That kit was designed and made by jake palmberg from higher heights offroad which no longer exists.
Havent seen one of them for years now.


yeah I was looking for a pic of his new Zuk and found a link to his instead




Thought you might like to know what he is up to now :twisted:

Hello, everyone!

I will be at moab 05.

I kept my axles , rims, tires. They will be under a 4dr. kick with automatic and twin cases.etc.etc.etc.
Toyota axles now live under my sammy and I am giving it to my brother to destroy in Las Vegas!

No pics, you will just have to go to moab and see it!

Later, Jake Palmberg
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

hmmmmmm, 4 door kick with auto and dual cases, i want pics :cry:
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

...... and portals :twisted:
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

:cool: volvo's??
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Unimog I believe
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Post by 85zook »

And Hummer also use portals but with an independent susp. setup
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest