Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Landcrusier 1HZ Motor

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 69
Joined: Sun Aug 10, 2008 8:15 am
Location: LAWNTON

Landcrusier 1HZ Motor

Post by itsracin »

Can anyone give me some idea of a price on a rebuilt Landcrusier 1HZ turbo (Denco Turbo) engine.

Kind regards.
Top
Posts: 134
Joined: Wed Mar 26, 2008 7:32 pm
Location: Brisbane

Post by Big_GQ »

Could spend 5 grand easy let me guess cracked pistons or knock?
Top
User avatar
udm
Posts: 659
Joined: Tue Apr 26, 2005 8:35 pm

Post by udm »

what do you want to rebuild? the turbo or the engine? rebuilding a turbo could cost around $800 + labour... and the engine around $3500 parts/machining + labour (labour could be as much as an extra $3500)
Ulises

www.OzSigns.com - 0400008422
Top
Posts: 69
Joined: Sun Aug 10, 2008 8:15 am
Location: LAWNTON

Post by itsracin »

Big_GQ wrote:Could spend 5 grand easy let me guess cracked pistons or knock?
doing research as may sell the one out of the vehicle i might be buying as engine has just been rebuilt and I was thinking of a petrol V8.

Kind regards.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

udm wrote:what do you want to rebuild? the turbo or the engine? rebuilding a turbo could cost around $800 + labour... and the engine around $3500 parts/machining + labour (labour could be as much as an extra $3500)
Then once you've spent all that may as well do the pump and injectors, >>$1500
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

There are two styles, a liner and non-liner type that effects machining costs, also expect the head will need to be thrown away due to cracks, aftermarket cores are about $1000 or so.

Cheers

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

There are two styles, a liner and non-liner type that effects machining costs, also expect the head will need to be thrown away due to cracks, aftermarket cores are about $1000 or so.

Cheers

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests