Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Noisy front Drive train

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 32
Joined: Sun Sep 28, 2008 11:08 pm
Location: Central Victoria

Noisy front Drive train

Post by Kruzeruzer »

I drive a 60series and its always had a nock in the front axil on turning, now on tight right hand turns it has started to growl. My question is would it be cheaper to get a second hand front complete assembly or fix it??
Boris
Posts: 67
Joined: Fri Sep 19, 2008 1:17 pm
Location: Newcastle, NSW

Post by bimbo »

possibly the wheel bearings. to check i t i think you jack up the front so the wheel is off the ground and grab the wheel at 12 and 6 oclock and see if there is any movement, then at 3 and 9 oclock.
Posts: 32
Joined: Sun Sep 28, 2008 11:08 pm
Location: Central Victoria

Post by Kruzeruzer »

willcheck the bearings asap, the noise I hear is probably more of a slow tic rather than a growl on r/h turns thanks any help appreciated.
Boris
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

If you buy another diff assembly, you could be buying someone elses problem thats just as shagged as yours. Your better off fixing your one, they arent hard to do. Just messy and takes abit of time
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests