Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Accesorry gauge light wiring

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 30
Joined: Sat Mar 12, 2005 4:50 pm

Accesorry gauge light wiring

Post by Pony »

Hey all;
Might be a dumb question, but I have just wired in some accessory gauges into my cruiser Ute and I have taken the power wire for the gauge bulbs buy simply tapping into an exiting gauge bulb power wire.
However here is my problem, the Ute has a dimmer switch and now my accessory gauge works back to front from the other gauges, eg when the dash brightens my new gauges dim.
I’m guessing that the existing bulbs may be positive earth?????
If I take the dimmer switch out of the circuit then all bulbs old and new work fine, so I am a bit confused.
Any help muchly appreciated.
Thanks
Pony
Top
Posts: 30
Joined: Sat Mar 12, 2005 4:50 pm

Post by Pony »

Told you it was a dumb question.
I had another look this arvo and found out that I need to return the negative to the same system as the positive came from.
So it is all good now.
Pony
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests