guys, probs an easy fix ( i hope so).
Whenever hubs ar elocked in, engaged in low range, and climbing something i get bad vibration. think its either transfer case or front diff?
have also been told maybe engine mounts.
Any tips?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bad vibrations
just fitted new speedo cable, and had a quick look.
The noise happens at low speeds. not sure about high speeds.
only has body lift 50mm. not sure what it is.
Where the steering arm connects to the left wheel, The other arm that connects the left wheel to the drivers side wheel, that had a little bit of movement. Is that normal.
Looked for sway bar too. Is that the Large U sort of shaped bar? Connects up the very front of the chassis, and back down the the wheels (close to there)???
The noise happens at low speeds. not sure about high speeds.
only has body lift 50mm. not sure what it is.
Where the steering arm connects to the left wheel, The other arm that connects the left wheel to the drivers side wheel, that had a little bit of movement. Is that normal.
Looked for sway bar too. Is that the Large U sort of shaped bar? Connects up the very front of the chassis, and back down the the wheels (close to there)???
Who is online
Users browsing this forum: No registered users and 0 guests