Page 1 of 1
bad vibrations
Posted: Mon Sep 29, 2008 9:38 pm
by andy1517
guys, probs an easy fix ( i hope so).
Whenever hubs ar elocked in, engaged in low range, and climbing something i get bad vibration. think its either transfer case or front diff?
have also been told maybe engine mounts.
Any tips?
Posted: Mon Sep 29, 2008 9:54 pm
by zooker
possibly transfer mounts
Posted: Mon Sep 29, 2008 10:01 pm
by Taff
How fast are you going when the vibes start??
Front shaft Uni joints?
Posted: Mon Sep 29, 2008 10:05 pm
by zookimal
How much lift does it have or is the front diff forwards? Front driveshaft might be towards the end of the slip joint and with wear it will move around. Or uni's in the front shaft.
Posted: Tue Sep 30, 2008 10:10 pm
by andy1517
just fitted new speedo cable, and had a quick look.
The noise happens at low speeds. not sure about high speeds.
only has body lift 50mm. not sure what it is.
Where the steering arm connects to the left wheel, The other arm that connects the left wheel to the drivers side wheel, that had a little bit of movement. Is that normal.
Looked for sway bar too. Is that the Large U sort of shaped bar? Connects up the very front of the chassis, and back down the the wheels (close to there)???