Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GV front differential problems

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

GV front differential problems

Post by giacomo.m »

Hi all,

I am owner of GV 3 door LHD 2001 with J20A engine, manual transmission and I have front carrier aluminium broken.
I want to replace it by a more solid carrier.
therefore which model of Vitara / GV have steel solid axle ( housing and third member ) ?
which gear ratio ?

thank you.

Giacomo
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

usually the manual v6's have the cast steel housing, but suzuki did all sorts of things. ratio could be a problem too as overseas markets had different gear. here the v6's generaly are 4.3 geared, but we also have 4.6 and 4.8 too.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

As mentioned, the V6 manuals have the steel housing but as you're in Europe you can also look for one from a diesel engined GV. The later autos also got them, around '03 I think. The XL-7 is also a source ...... BUT they have a different mount to the crossmember so it will require a small amount of fabrication to use.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 68
Joined: Thu Sep 09, 2004 8:52 pm
Location: Italy

Post by giacomo.m »

thank you
I have 4.875 ratio,
and I can to fit my ring/pinion -differential and front drive shaft to cast steel housing and third member ?

Giacomo
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Yes
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

Get an auto v6 diff from a late grandy say 2005 they are metal, will need to get the mounts with it as they changed with the later grandys. If you are chasing wreckers get them to count teeth first, Im going through getting wrong ratios from the east coast wreckers at the moment. hopefully 4th time lucky at the moment, I hope.
Man v6 4.3
Auto v6 and J20 4.875
1.6 grand same as early vitara 5.2 something
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 6 guests