Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vushes or castor plates
Moderators: toaddog, Elmo, DUDELUX
vushes or castor plates
im bought a 5 inch spring lift for a 80 series cruiser i was wondering if plates or bushes are better and what are ezyer to install
plates
im not too sure but i think you need plates as bushes only go to about 2 inch and plates are easier to install
General rule of thumb, bushes for 4", Plates for 6".
5 inch is a bit of a funny one, plates may be to much caster and bushes might not be enough.
You need to see how much castor you have with the lift kit in and buy the plates or bushes depending on how much correction is required. Hope this helps.
5 inch is a bit of a funny one, plates may be to much caster and bushes might not be enough.
You need to see how much castor you have with the lift kit in and buy the plates or bushes depending on how much correction is required. Hope this helps.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Who is online
Users browsing this forum: No registered users and 2 guests