Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU Gearbox 5th gear failure

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 8
Joined: Thu Aug 21, 2003 7:59 pm
Location: Nth Queensland

GU Gearbox 5th gear failure

Post by BillJan »

I drive a 2000 GU turbo Diesel with 115.000 km. Last Monday returning south from Cairns while passing a B double I lost 5th gear drive.
After getting my act together I apologised to the big rig driver who initially was not impressed with being cut up!
I think this sux, I survived the incident but for the less fortunate this failure could be catistrophic. Has anyone here had the same problem?
Posts: 51
Joined: Fri Mar 31, 2006 5:30 am

Post by Tony WestOZ »

Its a known problem on 1999 and 2000 GU`s.
Nissan do a replacement shaft and gear and there`s some aftermarket ones available.
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

read this post.

http://www.outerlimits4x4.com/viewtopic.php?t=22988



___________________________
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Posts: 8
Joined: Thu Aug 21, 2003 7:59 pm
Location: Nth Queensland

Post by BillJan »

Thanks for your feedback & information, I'm going to approach Nissan in Dandenong for warranty.
The timing for my failure was not good, I was on the Bruce north of Townsville in the on-coming lane beside a BDouble & caravan/car, I sucked the seat cushion up my ass!
I wont repeat what I said on CH40 but the truckie initially was not impressed.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

BillJan wrote:Thanks for your feedback & information, I'm going to approach Nissan in Dandenong for warranty..
i think your expecting a little much on an 8yr old car.

also more here http://www.patrol4x4.com/forum/index.php and here http://forums.overlander.com.au/ and here http://www.exploroz.com/Forum/Default.aspx and http://www.4wdmonthly.com.au/forum/index.php and.......
Posts: 51
Joined: Fri Mar 31, 2006 5:30 am

Post by Tony WestOZ »

bogged wrote:i think your expecting a little much on an 8yr old car.
I know a bloke how hit Nissan up for one in 2006 when his failed. He had to pay part of the cost but not all of it.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Tony WestOZ wrote:
bogged wrote:i think your expecting a little much on an 8yr old car.
I know a bloke how hit Nissan up for one in 2006 when his failed. He had to pay part of the cost but not all of it.
its similar to grenade owners expecting engine rebuilds..
Others since 06 have also had luck with it.. But at what point should it no longer be Nissans problem? 20yrs later?

I hope they come to the party for the bloke, that would be excellent. It can only be cost of dozen phone calls..

But recent history says he maynot be so lucky.

YMMV
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

bogged wrote:
Tony WestOZ wrote:
bogged wrote:i think your expecting a little much on an 8yr old car.
I know a bloke how hit Nissan up for one in 2006 when his failed. He had to pay part of the cost but not all of it.
its similar to grenade owners expecting engine rebuilds..
Others since 06 have also had luck with it.. But at what point should it no longer be Nissans problem? 20yrs later?

I hope they come to the party for the bloke, that would be excellent. It can only be cost of dozen phone calls..

But recent history says he maynot be so lucky.

YMMV
There is some law regarding faulty from factory. But have not done a recall. They are at least partly liable for repairs even out of warranty. This is the same way ZD30 owners are or where getting engines rebuilt/replaced way out of warranty.
THOUGHT FOR THE DAY....
Posts: 8
Joined: Thu Aug 21, 2003 7:59 pm
Location: Nth Queensland

Post by BillJan »

The vehicle may be 8 years old but with 115k on the clock its very young compared with many Patrols up here with original gearboxes.
Posts: 2
Joined: Sun Sep 21, 2008 9:52 am
Location: Gold Coast

Post by GU20s »

my gu ute did the same thing stripped the spline between the gear and the main shaft nissan do a modded shaft and gear as a set was just under $500 when i did mine 12 months ago (cost more for a bearing kit) mine is a 99 and had only done 120 000km was told that there was a recall on this but the original owner only did 30 000km in the first 3 years so it never got done untill it happened to me (on the highway moving house drove it 600km in 4th) all in all its not to bad to do i had the box out rebuilt with new bearings and back in in a day easy
User avatar
MJP
Posts: 77
Joined: Tue Aug 05, 2003 1:06 pm
Location: Melbourne, Aust.

Post by MJP »

Had the same thing happen to me. Cruising down the freeway in Melbourne and it just popped. Ended up getting Nissan to supply the main parts but it still cost me $1700 to get all the work done. There was a post on here that i started about it. Mine is a 4.2TD 2000 GU and was also out of warranty which meant i struggled to get them to cough up. It was 2 years ago now.

Good luck,
Mark
Posts: 8
Joined: Thu Aug 21, 2003 7:59 pm
Location: Nth Queensland

Post by BillJan »

Thanks gentlemen for all your feedback, it is obvious that there is a design issue. Nissan are lucky this particular drive spline design was only for 2-3 years. Or there would be a heap more angry people wanting retribution!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

if you end up paying for it, Marks adapters do a 5th gear change, which also changes ratio for the 5th.
Posts: 8
Joined: Thu Aug 21, 2003 7:59 pm
Location: Nth Queensland

Post by BillJan »

Thanks for your input. I'm already back up & running with a new Nissan genuine modified shaft & gear. I have been talking to a few of the guys who work the mines out west & all say to use 5th only above 80km/hr. That's even with the new g/boxes.
Post Reply

Who is online

Users browsing this forum: No registered users and 55 guests