looking for a hilux ln106 rolling chassis to start a project. (chassis, basic suspension, fair body, no engine or gearbox.)
try as i might google isn't being much help on where to find one.
where should i be looking?
(south east queensland.)
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rolling chassis - where to look?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
ebay, car point actions.
Then you have swap meets maybe the 4wd seller mags.
most stuff will be hot rods though.
Another way would be buy a real cheap wreaked hilux or cheap hilux action then you';d have the lot a smashed body won't matter if your notgoing to use it.
Is this for a rep hummer or something?
Then you have swap meets maybe the 4wd seller mags.
most stuff will be hot rods though.
Another way would be buy a real cheap wreaked hilux or cheap hilux action then you';d have the lot a smashed body won't matter if your notgoing to use it.
Is this for a rep hummer or something?
i wanna use the body.. no rep hummer, wanna truck that i can use for social wheeling, trips away and the occasional entry level comp.zagan wrote: Another way would be buy a real cheap wreaked hilux or cheap hilux action then you';d have the lot a smashed body won't matter if your notgoing to use it.
Is this for a rep hummer or something?
yea , im thinking if i can just get one without an engine an gearbox, itll be heaps cheaper than buying an already working one.Taff wrote:find the cheapest complete one you can, then you will have all the bits and it will be easy to get regod
meanwhile.... whats the plan?
plan? boosted 1kzte, 34 x 10 ish rubber, engineered, simple tray and barwork to keep it as light as possible. the rest will be decided as i go, but the general idea is to build it so that i can compete in entry level comps.
Who is online
Users browsing this forum: No registered users and 0 guests