Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Are there any bullbars that fir a feroza?

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Contact:
Contact smellypaddler

Are there any bullbars that fir a feroza?

Post by smellypaddler »

Does anyone know of a bullbar from another vehicle that will fit a Feroza widetrack?

I have never been lucky enough to find a Feroza bullbar for sale byt REALLY want to get one.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

IF you mean "without major work" then I'd say its unlikely, but if you prepared to do some cutting and welding then something of similar width ( Hilux for example ) might be made to fit.

Personally I'd ring every Daihatsu wrecker I could find and make an offer they can't refuse.. Expensive in the short term but it going to fit.

Also keep in mind that if you lift the body the bars going to be too low - more work....
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Contact:
Contact smellypaddler

Post by smellypaddler »

thanks mate, I thought that might be the answer. I can dodgy up the mounts but I wouldn't be confident cutting and welding the ends to get teh width right.

I had tried all the wreckers a couple of years ago and they just laughed. I guess I'll have to give it another go.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Actually the mounts are the major task... odd angles everywhere. A real pita to do properly especially if you have an alloy bar.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 0 guests