Page 1 of 1
torno covers????
Posted: Tue Mar 16, 2004 7:14 pm
by Macca177
ok where's the best palce to get them made up?
a 4wd shop or is there specialzed shops?
also should i get it b4 the roll bars or after ?
its for a single cab lux so im gussin round $300 would be wot they are worth ?
am i near in $$?
Posted: Tue Mar 16, 2004 7:49 pm
by ozy1
Id get it after the bars, as they will be able to make it look like a neater fit!
Posted: Tue Mar 16, 2004 8:41 pm
by tuff 45
ozy1 wrote:Id get it after the bars, as they will be able to make it look like a neater fit!
D and D Autotrim do a good job, they are at South Windsor. Do the roll bar's first.
Posted: Tue Mar 16, 2004 8:59 pm
by taziiy
any motor trimmer should be able to do it but its just a matter of shopping around for best price after the bar work
Posted: Tue Mar 16, 2004 9:03 pm
by ToNkA
I got mine done for $300 from a local auto trimmer.
Got it cut to fit the Roll Bar and had two bar supports and clips put around the tray.
Posted: Wed Mar 17, 2004 8:17 am
by 80UTE
I got a new one 2 months ago for my hilux twincab from a Toyota dealer and i cost me about $185.00
Posted: Wed Mar 17, 2004 8:37 am
by XXXL80
give nans tarps a call at lidome.
really good service and great price.
Posted: Wed Mar 17, 2004 1:55 pm
by 98lux
80UTE wrote:I got a new one 2 months ago for my hilux twincab from a Toyota dealer and i cost me about $185.00
$180 for mine with fitting kit, and $50 for rollbar mods
Posted: Wed Mar 17, 2004 2:19 pm
by roadrunner
There's a bloke on the road out to Shark Park ( turning off Taren Point Rd) who made one up for my Landcruiser. Top job and is more than willing to put the effort in to make sure you get what you want. Its a custom trim place but he does boat and ute stuff too.
Buggered if I can remember the name though
Posted: Wed Mar 17, 2004 2:22 pm
by Shorty40
roadrunner wrote:There's a bloke on the road out to Shark Park ( turning off Taren Point Rd) who made one up for my Landcruiser. Top job and is more than willing to put the effort in to make sure you get what you want. Its a custom trim place but he does boat and ute stuff too.
Buggered if I can remember the name though
Is it near the boat accessory place, just past the lights ?
If so I can find out the name tonight, I drive past there on the way to and from work.
Posted: Wed Mar 17, 2004 4:45 pm
by roadrunner
Shorty40 wrote:roadrunner wrote:There's a bloke on the road out to Shark Park ( turning off Taren Point Rd) who made one up for my Landcruiser. Top job and is more than willing to put the effort in to make sure you get what you want. Its a custom trim place but he does boat and ute stuff too.
Buggered if I can remember the name though
Is it near the boat accessory place, just past the lights ?
If so I can find out the name tonight, I drive past there on the way to and from work.
Yeah, could be the place. Its just after the lights heading for the footy oval. There's was an old servo at the lights. The servo and the trimmer dude will be on your left as you head to Kurnell.
Posted: Wed Mar 17, 2004 4:55 pm
by Macca177
thanks all ... is it near or close to battery world ?
soudns good!
will get bars 1st then
thanks all again
Posted: Wed Mar 17, 2004 6:23 pm
by roadrunner
Macca177, its just around the corner from Battery World.
Definitely get your bar work done first, but an idea may be to have the cover made with velcro patches over where the bar comes through just in case you decide to remove the bar later.
Saves you getting another cover made up
