Outer Limits 4x4 Board

Posted: **Tue Oct 14, 2008 4:50 pm**

I have the option of buying a whole '93 4 door vitara EFI auto, which I presume has the 4 speed Aisin Warner?

I want to put it all into my '87 LWB Sierra, however I don't want to run dual transfers. (even though I will definitely have the space)

Searching here I have found plenty of info but it all seems to relate to the older 3 speed trimatic. Its also all from early '07.

Has anyone on here done a divorced sierra transfer on the 4 speed? Pics

Does anyone make a kit to cut out the vit transfer?

cheers

Posted: **Tue Oct 14, 2008 5:31 pm**

http://www.outerlimits4x4.com/phpBB2/ft ... ght=vitara
http://www.outerlimits4x4.com/phpBB2/ft ... ght=vitara

these may help

Posted: **Tue Oct 14, 2008 7:12 pm**

I am running this set up and it works a treat, using the backing plate that joe blow makes there is no need to move the transfer

Posted: **Wed Oct 15, 2008 11:09 am**

cazook wrote:I am running this set up and it works a treat, using the backing plate that joe blow makes there is no need to move the transfer

The AW4 is quite a long box... how much jackshaft did you end up with if you didn't move the x-fer?

Posted: **Wed Oct 15, 2008 2:43 pm**

the tube is still about 140mm long.

Outer Limits 4x4 Board

vit auto -> sierra transfer

vit auto -> sierra transfer