Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

white smoke from breather pipe

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 156
Joined: Wed Feb 20, 2008 12:02 am
Location: Gold Coast

white smoke from breather pipe

Post by esp22 »

Hi, the other day my mates landcruiser diesel started blowing white smoke from the breather pipe....does this normally mean oil getting passed the rings in the piston?there is a new vehicle on the way and he wants to know how he can get this to stop until his new car gets thre?is there ay thicker oil that he can put in or something?

Thanks
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Re: white smoke from breather pipe

Post by Nat84 »

esp22 wrote:Hi, the other day my mates landcruiser diesel started blowing white smoke from the breather pipe....does this normally mean oil getting passed the rings in the piston?there is a new vehicle on the way and he wants to know how he can get this to stop until his new car gets thre?is there ay thicker oil that he can put in or something?

Thanks
if it's blowby you can't stop it with out new rigs etc etc.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

Is he using any water?
I'd get a colling system pressure test done to make sure I hadn't done a head gasket
Posts: 324
Joined: Tue Jan 03, 2006 10:36 pm
Location: Port Hedland W.A.

Post by shamozzle »

That's what I was thinking. White smoke, might just be a cracked head or head gasket
94 Surf ssr-x Ltd 3.0td

3 years. 3 states. Not movin anymore
Posts: 156
Joined: Wed Feb 20, 2008 12:02 am
Location: Gold Coast

Post by esp22 »

hi, had a look at it today and turns out to be cracked head...currently on 3rd bottle of chemiweld lol thanks for the help
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests