"cranky link"

Post by **60_series_united** » Thu Oct 16, 2008 8:25 pm

how should i mount the centre bolt? just weld it or make it so i can change if it happins to break

Post by **junior80** » Thu Oct 16, 2008 9:32 pm

are you talking about an x-link type thing? how are you going to fit one to a 60 series?

Post by **macca81** » Thu Oct 16, 2008 9:34 pm

yes he is talking about "x-link"

Post by **junior80** » Thu Oct 16, 2008 9:37 pm

has he done a coil conversion? doesn't look like it in his avatar..

EDIT: just read his sig.

in which case weld the thing on there is your only option isn't it?

Post by **Hoppy11** » Fri Oct 17, 2008 1:10 am

Pics of the convertion

Hoppy

Post by **60_series_united** » Fri Oct 17, 2008 2:01 pm

Hoppy11 wrote:Pics of the convertion

Hoppy

im just putting a 60 body on an 80 chassis was goin to put the 80 suspention under the 60 but its to much work, havnt done it yet, i wanna get my suspention mods done first

Post by **taps** » Fri Oct 17, 2008 4:42 pm

Im confused..........60 to 80 with 80 diffs under 60 ruuning 80 series chassis with 60 diffs.....and now a x-link............im going to have and go lie down

Post by **macca81** » Fri Oct 17, 2008 5:30 pm

i think hes gunna put a 60 on an 80 that would clearly already have 80 diffs...

or is he putting 80 diffs under a 60 thats on a 40 chassis with 100 door handles?

Post by **Struth** » Fri Oct 17, 2008 6:02 pm

That's a lot of door handles......

Post by **taps** » Fri Oct 17, 2008 7:20 pm

Could be a interesting build thread

Post by **Shadow** » Fri Oct 17, 2008 7:23 pm

do all the door handles work?

or is it an anti theft thing?

Post by **taps** » Fri Oct 17, 2008 7:31 pm

Shadow wrote:do all the door handles work?

or is it an anti theft thing?

The dude would spend 15 minutes trying to work out WTF is going on

Post by **macca81** » Sat Oct 18, 2008 12:05 am

clearly i meant 100 series... but yes, 100 handles does sound much more interesting

Outer Limits 4x4 Board

"cranky link"

"cranky link"

Who is online