Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Wheel Bearing Hubs Twin Piston vs Single Piston

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

GQ Wheel Bearing Hubs Twin Piston vs Single Piston

Post by LOCKEE »

I am swapping the front complete diffs between my new car which has twin piston brakes and a earliuer modified housing that has been laminated and had all seals and bearings replaced.

Can any one confirm that the hub that the rotors bolts to is the same?

Will save me time if that is the case.
:rofl: :popcorn: :snipersmile:
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Just bolt up the twin piston ones. They will fit. You need to use the same bolts though, as they are different.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Post by ORSM4B »

How did you go as l think the hubs are alot diffent as the rotor won't go over the hub properley.....

Cheers Chris
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

ORSM4B wrote:How did you go as l think the hubs are alot diffent as the rotor won't go over the hub properley.....

Cheers Chris
Haven't touched them yet.
:rofl: :popcorn: :snipersmile:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest