Outer Limits 4x4 Board

Posted: **Sat Oct 18, 2008 6:30 am**

I am swapping the front complete diffs between my new car which has twin piston brakes and a earliuer modified housing that has been laminated and had all seals and bearings replaced.

Can any one confirm that the hub that the rotors bolts to is the same?

Will save me time if that is the case.

Posted: **Sat Oct 18, 2008 8:11 am**

Just bolt up the twin piston ones. They will fit. You need to use the same bolts though, as they are different.

Posted: **Tue Oct 21, 2008 8:23 pm**

How did you go as l think the hubs are alot diffent as the rotor won't go over the hub properley.....

Cheers Chris

Posted: **Wed Oct 22, 2008 4:11 pm**

ORSM4B wrote:How did you go as l think the hubs are alot diffent as the rotor won't go over the hub properley.....

Cheers Chris

Haven't touched them yet.

Outer Limits 4x4 Board

GQ Wheel Bearing Hubs Twin Piston vs Single Piston

GQ Wheel Bearing Hubs Twin Piston vs Single Piston