Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
converting rb30 carby to efi. how hard is the wiring
converting rb30 carby to efi. how hard is the wiring
im currently in the process of changing my rb30 from carby to vl efi. everything is in place. all relays, fuel pumps, etc is done. just had a question about the wiring side of things. how to wire it up to start. i was hoping i didnt need the vl body harness and battery harness. if any one has done this conversion and has some knowledge on this subject your input would be greatly appreciated. motor has stage 2 crow cam suited for efi motor. msd blaster extractors and full system. 8.8 ml leads and iridium plugs and snorkle so should move along ok. until i find a turbo motor that is. i have 2 vls complete on my block of land so why not change it over i guesse. cheers guys
Who is online
Users browsing this forum: No registered users and 0 guests