Outer Limits 4x4 Board

hi i am putting drop boxs in my gu and noticed the front radius arm bolt on both sides of the diff has elongated there for the bolt is sloppy...has anyone had this before is so how did you fix it any help appreciated.


Cheers Aaron

previous owner has done the dodgy the get more flex out of the front end...

this is common, loose bolts can cause this. You could fix it by welding washers/plates with a neat hole to the outside or use a peice of copper on the inside, weld the worn section, dress it back with a grinder and die grinder.

You should be able to just tighen the bolts to clamp it inplace, how far is it elongated?

thanks for the replys. There elongated about 3mm towards the front and back.