Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gen 2 high pinion front diff into Gen 1

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Gen 2 high pinion front diff into Gen 1

Post by Brendan-s »

Browsing the bible last night, (you know, the tech 'imfo' database :D) and came across the axle data.

Would I be right in assuming that an NH/NJ 3.0L manual front diff ("3.0V6 :- same as Gen 1 except for NH & NJ auto has 7.25" diameter front diff (high pinion) NH & NJ 5sp man has 8" diameter front diff (high pinion)") would be a bolt in swap for my NG's low-pinion diff ("front axle = 28 spline, 29mm diameter, diff = 8" diameter (low pinion) ")?

Yes I searched but it just returns loads of crap.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest